ACE / Ace International Trade Co., Ltd.

The Most Suitable Fuel Oil Additive. Prevent potential troubles from happening by LSFO due to SOx Regulation. The Most Suitable Fuel Oil Additive. Prevent potential troubles from happening by LSFO due to SOx Regulation.
MGI (Marine Gasoil Improver)

The fuel oil (MGO/LSFO) additives such as "MGI" a Marine Gasoil Improver.
MGI
Marine Gasoil Improver

"MGI" is a lubricity improver which will contribute to potential damages on fuel system by using MGO/LSFO due to SOx regulation.

What is "MGI" a Marine Gasoil Improver ?
The Fuel Oil (MGO/0.5% S. LSFO) additives.

MGI is a lubricity improver which will help prevent damage on fuel system by using MGO/LSFO due to SOx regulation.
MGI forms a special coating on the metal of fuel system and decreases frictions and abrasions.
We have been receiving many appreciation messages from customers that they have gone through troubles at the Fuel Pumps.

Major Attributes :

  • Forms a special coating on the metal of fuel system.
  • Reduces frictions and abrasions by special coating.
  • Maintains cleanness of fuel injector and firing chamber.
  • Decreases carbon attachment.
  • Moderates soot and smoke.
  • Does not change viscosity and sulfur content.
Lubricity improvement
Reduces friction
Detergency performance
Environmentally Friendly

Apply "MGI", an additive for MGO/LSFO, to prevent potential troubles of scorched and unfavorable friction at fuel pump & fuel injector !

Potential damages at fuel pump & fuel injector in fuel system are concerned due to inferior lubricity and lower viscosity by MGO/LSFO where it may cause potential troubles in operation.

  • Prevent an abrasion trouble at Diesel Pump and its Injector.
  • Improves lubricity by remaining viscosity and sulfur content unchanged of MGO/LSFO.
  • Clean out Plunger Pump and reduces the maintenance cost.

Improves Lubricity

Confirmation of Lubricity improvement by twice better in loading by adding "MGI".

Friction Reduction

Observed about 20% improvement over MGO Only in score by mixing ratio of 1/2,000.

Cleanliness

  • Maintains cleanness at Fuel Injector and Firing Chamber
  • Decreases carbon attachment.
  • Will help eliminate soot and smoke.

Environment

Remain viscosity and sulfur content unchanged of MGO/LSFO.
MGI provides an answer to low-sulfur fuel but is different from a cooling system
Therefore parallel use is possible.

Directions

Add "MGI" directly into bunker fuel holding tank at range of 1/2,000 to 1/5,000 mixing ratio each time tanks are filled.
(The mixing ratio should be considered by taking an operation conditions)

Take a countermeasure for potential lubricity troubles by MGO/LSFO by "MGI" !